User's Manual

Page 10
Norsat ODU 090-25012-00
F
IGURE 3
ODU Deployed
ODU Interfaces
The Norsat ODU has the following interfaces:
• Transmit IF
• Receive IF
• Transmit Monitor IF
• SSPA Control and Monitor
• AC Power
Transmit IF (Tx)
The Transmit IF (Tx) connector is a 50 ohm N-type female connector,
which is colour coded red. The signals supplied on this interface are:
Transmit IF (950 and 1450 MHz): the signal to be upconverted,
amplified and transmitted to the satellite. This signal may be either a
continuous wave (CW) or a modulated signal.
10 MHz reference: provides a reference signal for the
Transmitter/Upconverter.
24 V DC: supplied to the Transmitter/Upconverter.
N
OTE
The transmitter that is mounted on the Transmitter Base Plate requires
the 10 MHz signal in order to operate.