User's Manual

Page 18
Norsat ODU 090-25012-00 Norsat
6. Remove the IFL cable and Power cord.
FIGURE 7
Tripod Legs and Feet
Tripod Legs
7. Remove the three tripod legs and feet; refer to Figure 7.
8. Insert the foot support rod into the foot; refer to Figure 9.
9. With the support base remaining in the case, attach each of the
three tripod legs to the support base; refer to Figure 8:
i. Slip the two pins at the top of the leg into the guide slots on
the support base; refer to Figure 9.
ii. Once in place, turn the hand wheel clockwise, until tight, to
secure; refer to Figure 9.
10. Remove the support base, with legs attached, from the case; refer to
Figure 8.