User's Manual

Page 20
Norsat ODU 090-25012-00 Norsat
FIGURE 10
Elevation Jack Screw, Quick Adjust Collars and Elevation
Fastening Collars
Elevation Jack Screw
12. Locate the following; refer to Figure 10:
• Elevation jack screw: quantity 2 of different lengths;
select the length appropriate for the required
elevation.
• Quick Adjust Collars: quantity 2
• Elevation fastening collars: quantity 2
13. Remove the two elevation fastening collars and one quick
adjust collar from the elevation jack screw.
14. Slide the first quick adjust collar onto the elevation jack screw
to the required position, approximately 1/3” from the bottom,
by depressing button.
15. Insert the elevation jack screw through the elevation base
support hole, from the underside of the base; refer to Figure
11.
FIGURE 11
Elevation Base Support Hole
16. Slide the second quick adjust collar onto the elevation jack
screw to required position by depressing the button; refer to
Figure 12.