User's Manual

Norsat ODU 090-25012-00 Page 43
Troubleshooting
This chapter provides troubleshooting scenarios, along with suggested
solutions.
General
1. Check all cable connections to ensure they are secure and
correctly hooked up.
2. Check your external power source to ensure the source is stable.
DC Power Indication
Listen for the fans on the SSPA. If the fans are running there is DC
power applied to the unit. Transmission must be enabled by the IDU.
Transmission
Indication
The ODU has a red LED that indicates the system is transmitting:
i. If the red LED is ON, this indicates that the transmitter is ON.
ii. If the red LED is OFF, this indicates that the transmitter is
OFF.
FIGURE 46. Transmission Indicator.
CHAPTER 9