User's Manual

302UM0017 Rev 01 PD230 Enhanced Detector User Manual Page 25 of 37
6. CONFIGURATION
WARNING: 8. The connector PIN
assignments
vary from model to model.
Refer to the label on the side of the
unit for connector PIN assignment.
NOTE 1: The tables below show the PIN assignments for Nortech’s standard PD230 Enhanced detector
models, on other models the pin assignments may change.
WARNING: 9. The wiring harness is only rated for
SELV voltages (less than 60 V dc or
less than 42 V ac).
If the relays are to switch higher
voltages use CE LVD approved 11 pin
sockets.
NOTE 2: All relay contact descriptions refer to the tuned and undetected state.
6.1 PD231 Enhanced Detector : English
11 – PIN CONNECTOR WIRING for: 302FT0014
302FT0041
WIRING HARNESS
WIRE COLOUR
11 PIN
Connector
Pin No.
Function
Red 1 Live
Black 2 Neutral
120 V AC ± 10%
30 mA 60 Hz
Blue 3 Channel 1 Loop
Blue 4 Channel 1 Loop
Twist this
Pair
Yellow 5 Channel 2 Loop
Yellow 6 Channel 2 Loop
Twist this
Pair
Grey 7 Channel 2 N/O Relay Contact
Grey 8 Channel 2 Relay Common Contact
Green/Yellow 9 Earth
White 10 Channel 1 N/O Relay Contact
White 11 Channel 1 Relay Common Contact