Operation Manual

301UM0030_01 PD130 Enhanced Vehicle Detector User Manual Page: 18 of 29
6. CONFIGURATION
WARNING: 8. The connector PIN assignments vary from model
to model. Refer to the label on the side of the unit
for connector PIN assignment.
NOTE 1: The tables below show the PIN assignments for Nortech’s standard PD130 Enhanced
models. On other models the pin assignments may change.
WARNING: 9. The wiring harness is only rated for SELV
voltages (less than 60Vdc or less than 42Vac).
If the relays are to switch higher voltages use
CE LVD approved 11 pin sockets
NOTE 2: All relay contact descriptions refer to the tuned and undetected state.
6.1 PD131 Enhanced Detector - Order number 301FT0119
11-pin connector wiring for PD131 DETECTOR - Order number 301FT0119
301FT0045
Wiring Harness
Wire COLOUR
11 PIN
Connector
Pin No.
FUNCTION
Red 1 Live Power supply
120V 10% 50/60 Hz
Black 2 Neutral
Grey 3 Pulse Relay N/O
Green 4 Earth
Brown 5 Presence Relay N/O
Yellow 6 Presence Relay Common
Blue 7 Loop Twist this
Pair
White 8 Loop
Violet 9 Pulse Relay Common
Pink 10 Presence Relay N/C
Orange 11 Pulse Relay N/C
WARNING: 10. The wiring harness wire colour to PIN No.
assignment only applies to wiring harness Part
No. 301FT0045. Other wiring harnesses will have
different wire colour to PIN No. assignments.