Operation Manual

301UM0030_01 PD130 Enhanced Vehicle Detector User Manual Page: 27 of 29
APPENDIX C –REQUEST FOR TECHNICAL SUPPORT
FORM
For Technical support please fill in the form below and send it to your supplier. Its is recommended that at
installation you complete this form as a record of the Installation. If there is a problem later on you can identify
what has changed.
For locating faults in “Inductive Loop Vehicle Detector” installations it is highly recommended that you use
the DU100 DIAGNOSTICS UNIT. Please refer to the DU100 user manual Doc. No. 895UM0001 for details of
how to operate the DU100.
Contact Details:- Your Name: __________________________________
Your company: ____________________________
Telephone No. _______________________ Mobile/Cellphone No. _________________
FAX No. ____________________________
E-mail: ____________________________
Postal address: ____________________________________
_____________________________________
_____________________________________
Product Model (i.e. PD134) _____________ Product FT No. 301FT_____________
Product Serial Number: ___________________________
Site Name: __________________________________ Detector No. (at the site) : ______________
What are the settings of the switches on the front of the unit ON or OFF
Switch 1 ___________ (FREQ Frequency)
Switch 2 ___________ (FREQ Frequency)
Switch 3 ___________ (SENS Sensitivity)
Switch 4 ___________ (SENS Sensitivity)
Switch 5 ___________ (ASB Automatic Sensitivity Boost)
Switch 6 ___________ (FILT Filter)
Switch 7 ___________ (PULSE Pulse on detect or un-detect)
Switch 8 ___________ (PRES Presence Limited or Permanent)
What application is this unit used in (short description)_______________________________________
__________________________________________________________________________________
__________________________________________________________________________________