User's Manual

41
Cancel Display
A “cancel” message will be sent to the Central Monitoring Station if the system is disarmed within a
preset period of time after an alarm is triggered. The system can be set to display that a cancel report
was sent, or for higher security, the system can be set not to display the cancel message.
CANCEL DISPLAY
❑ ON (regular setting) ❑ OFF
Dialer Delay
If an alarm occurs, the system will delay dialing for a short time to allow you to disarm the system
in case the alarm was accidentally tripped. The dialer delay reduces nuisance traffi c to the Central
Monitoring Station and can prevent receiving fi nes that many cities impose when police respond to
a false alarm. Your installer also can program the system for no dialer delay.
DIALER DELAY
❑ 30 Seconds (regular setting)
_________ Seconds
2-Way Voice
The system can connect with a Central Station operator so they can converse with people in the
premises after an alarm. The 2-way voice option allows communication to and from the Control Panel
and the Central Station. 2-way voice communications will occur after the system has made its alarm
report. Your installer sets which sensors can trigger the 2-way voice option.
2-WAY VOICE
❑ OFF ❑ ON (regular setting)
Audio Listen-in
For alarm verifi cation, the Central Station operator can monitor the sounds in the premises after a
silent burglary or panic emergency alarm has been sent. When the system is in audio listen-in mode,
the Central Station can hear the sounds of intruders without their knowledge of being monitored. For
panic alarms, your installer sets which panic button remotes can trigger the audio listen-in option. If
the emergency display panic button is set for silent panic, can also trigger audio listen-in mode.
AUDIO LISTEN-IN
❑ ON (regular setting) ❑ OFF
Telephone Remote Control Answer
Your installer selects if your system supports the remote telephone option or not. If the telephone
remote control answer option is turned on, the system will require calling it twice within 30 seconds
for the Control Panel to answer the call. See the “Remote Control by Telephone” section of this
manual.
TELEPHONE REMOTE CONTROL ANSWER
❑ OFF (regular setting) ❑ ON
Installer Set Options