User's Manual

Key Fob Arming and Disarming

Your system may be equipped with one or more wireless key fobs.

Up to eight key fobs can be used to control the system remotely.

Each key fob has four buttons and can perform ﬁ ve functions. A User

Code is not required when arming or disarming the system with a

wireless key fob.

There are several key fob options that can be set by the installer.

Check the options that apply.

• Have key fob arm without an Entry Delay.

❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8

• Allow key fob disarming.

❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8

• Enable key fob auxiliary key.

❑ Fob #1 ❑ Fob #2 ❑ Fob #3 ❑ Fob #4 ❑ Fob #5 ❑ Fob #6 ❑ Fob #7 ❑ Fob #8

• Key fob emergency keys. (Check one emergency function for each key fob.)

Function Fob #1 Fob #2 Fob #3 Fob #4 Fob #5 Fob #6 Fob #7 Fob #8

Auxiliary Alarm

Audible Alarm

Silent Panic Alarm

Fire Alarm

Emergency Keys Disabled

Key Fob Arming to Stay Mode

• To arm the system to Stay Mode using a key fob, press the (STAY) button.

✓ NOTE: If there are open perimeter doors or windows, the system will not allow arming to Stay

Mode with a wireless key fob. All open sensors must be bypassed at the Control Panel ﬁ rst.

Key Fob Arming to Away Mode

• To arm the system to Away Mode using a key fob, press the (AWAY) button.

✓ NOTE: If there are open perimeter doors or windows, the system will not allow arming to

Away Mode with a wireless key fob. All open sensor-protected doors and windows must

either be closed or bypassed at the Control Panel before arming with a wireless key fob.

Key Fob Disarming

• To disarm the system from Stay or Away Mode using a key fob, press the

(DISARM) button. (This option must be enabled by the installer.)

Key Fob Emergency

• To trigger an emergency alarm using a key fob, press the (AWAY) and (DISARM)

buttons at the same time for ﬁ ve seconds. (This option must be enabled by the installer.)

✓ NOTE: If an emergency alarm is triggered by a key fob, it cannot be stopped using a key fob

(DISARM) button. The alarm must be canceled at the Control Panel.

Key Fob Auxiliary

• To trigger the Control Panel’s auxiliary output, press the (AUXILIARY) button.

• If this feature is used, your auxiliary output controls: _______________________________

Burglary Protection