User's Manual

Step 1:
Activate Libris
1. Insert the Power Cord into the Charger.
Plug the large end of the Power
Cord into a standard wall outlet.
2. Place Libris in the Charger.
3. Libris will automatically turn
on and begin activation.
4. Follow the voice prompts until directed
to connect to your response team.
Step 2:
Call to Set Up
1. Press and hold the Call Button.
2. Your response team will answer shortly
to customize Libris and complete set up.
3. After the call, charge Libris in the Charger
for 4 hours. Then it is ready for use.
Step 5:
Wearing Libris
Libris can be worn on a belt using the
Belt Clip, or as a pendant around your
neck using the Lanyard/Clip. If worn
with the Lanyard, Libris should be
worn under clothing to prevent excess
movement of the device.
To attach the Belt Clip or Lanyard/Clip:
1. Align the notched side of
Clip with the notched area
on the back.
2. Press inward until the Clip
notches are nested within
the Libris notches.
3. Firmly push the Clip toward
the top of Libris. It is secure
when you hear a click or you
can no longer see the notches
on the Clip.
Step 3:
Adding Pendants
The Libris Charger can be programmed to
recognize optional Pendant Calling Devices.
To add a Pendant Calling Device:
1. Be sure the Libris is in the Charger
and the Charger is powered on.
2. Press and release the Program
button on the rear of the Charger. The
Program indicator will light amber.
3. Within 20 seconds, activate a
Pendant Calling Device.
4. The Program indicator should light green
when the Pendant is recognized.
5. Repeat steps for additional Pendants.
Step 4:
Testing Pendants
If optional Pendant Calling Devices are
added, they must be tested.
To test Pendant Calling Devices:
1. Be sure the Libris is in the Charger
and the Charger is powered on.
2. Activate a Pendant Calling Device by
pressing the button on the Pendant.
3. Your response team will answer
shortly to verify your testing.
Enjoy new
freedom
This Quick Start Guide will help you set
up and activate Libris. Please read
this entire guide before using Libris
to ensure it is set up correctly and
ready for use.
1
2
1
What’s in the Box
Libris Charger Lanyard/Clip Belt Clip
Power Cord Quick Start Guide User Guide
CONTENTS
ick Sta
rt
Guid
Quick Start Guide
User Guid
e
User Guide
IMPORTANT:
Libris is not ready for use until you have:
• Charged Libris in the Charger for 4 hours
• Completed a call with the response team
IMPORTANT:
Pendant Calling Devices can only place
an emergency call if the Libris is resting
in the Charger and the Charger Power
Cord is plugged into AC power.
Pendant Calling Devices do not have
a speaker or microphone, talk to the
response team through the Libris unit.
PRINTER’S INSTRUCTIONS:
INSTRUCTIONS, QUICK GUIDE, CHARGER, NUMERA - P/N: 10009954 X2 - INK: 4/C + COATING - MATERIAL: 80 LB. VELVET COVER - SIZE: FLAT 16.000” X 4.750” FOLDED 2.750” X 4.750” - TOLERANCE: ± .125" - SCALE: 1-1 - ROLL FOLDING: Z-FOLD, FINISH WITH COVERS SHOWING - SIDE 2 OF 2
1
2
4
3