User's Manual

Introduction
Thanks for choosing this wireless PIR Motion Sensor of the home security device. The new
multi-sensor consists of motion, temperature, humidity & light sensor for combing several
functionality in one device; more attractive and economic consideration. This sensor is a
Z-Wave
TM
enabled device (interoperable, two-way RF mesh networking technology) and is
fully compatible with any Z-Wave
TM
enabled network and it’s security framework. Every
mains powered Z-Wave
TM
enabled device acts as a signal repeater and multiple devices
result in more possible transmission routes which helps eliminate “RF dead-spots”.
Z-Wave
TM
enabled device displaying the Z-Wave
TM
logo can also be used with it
regardless of the manufacturer, and ours can also be used in other manufacturer’s Z-Wave
TM
enabled networks. This sensor monitors movement, and send Z-Wave
TM
signal when
movement is detected inside the building. With Temperature sensor built inside, it will
send the signal out when temperature changed. When the device is secure included into
Z-Wave network, above communication will be encrypted.
Product Description and Specification
*** For indoor use only ***
Specification: Package Content:
Protocol: Z-Wave™ (ZM5202)
Frequency Range:
908.42MHz (M360PIRZ-1)
Operating Range: Up to 100 feet line of sight
Operating Temp.: -10°C~ 40°C (5°F~104°F)
Battery: AAA x 2
1pc
1pc
2pc
1pc
M360PIRZ-1
Adhesive tape for sensor
AAA Alkaline Battery
Installation & Operation Manual
Z-Wave Command Classes:
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_BATTERY
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_NOTIFICATION_V4
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SENSOR_MULTILEVEL_V7
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
- 1 -
(Installation for Information)
(A) – Wall Corner
(C) - Ceiling
(D) – Vertical
(E) - Angled
(B) – Table
Program Switch