Welcome to your ADT Keychain Remote
1 1. Setup Make sure the ADT Keychain Remote is within 15 feet of your SmartThings ADT Security Hub during setup. • • Once you've set up your remote, you'll be able to use it anywhere within 350 feet from the ADT Security Hub. (Exact range depends on your home’s construction, environment, position of the ADT Security Hub, and the position and number of other connected devices.) Make sure that your ADT Security Hub is disarmed before connecting a new device. 2.
2 Setup 4. Use the SmartThings app to scan the QR code on the back of the remote and then follow the on-screen instructions to complete setup. If you have an ADT professional monitoring service activated, make sure that your ADT Security Hub is in Test Mode to avoid triggering a false alarm. See the ADT Security Hub User Guide for more details. 1. Keychain Remote (Back) Testing Press the Away button on your remote for 2 seconds to arm the ADT Security Hub.
3 Troubleshooting To reset the ADT Keychain Remote to factory settings: 1. Press and hold all four buttons for 5 seconds. The red LED will blink fast. 2. Once the reset is complete, the green LED will turn on for 5 seconds. 3. Release the button. If the button is released before the reset is complete, the reset will not be successful. 4 1. Replacing Batteries Remove the cover by by inserting a coin into the end of the remote and twisting. 2. Remove the old battery and insert a new CR2450 battery.
Using your ADT Keychain Remote 7 Suggestions The ADT Keychain Remote allows you to arm or disarm your SmartThings ADT home security system at the press of a button, or to send a panic alert to ADT professional monitoring services (additional fees apply). There are many ways you can use an ADT Keychain Remote: • Use one to arm your system and set it to initiate optional ADT professional monitoring services if an intrusion is detected in your home (additional fees apply).
Suggestions • Use one to arm your system and set it to turn down a connected thermostat when you leave. • Use one to disarm your system and set it to turn on connected speakers when you come home. Visit SmartThings.com/Welcome for more ideas, tips, and special offers. 8 Works With SmartThings SmartThings works with a wide range of connected devices, including lights, cameras, locks, thermostats, and sensors.
SmartThings, Inc., 665 Clyde Ave, Mountain View, CA 94043, USA. Information in this document is subject to change without notice. Revised 05/17. Copyright 2017 SmartThings, Inc. All rights reserved. ADT and the ADT logo are marks and/or registered marks of ADT. Unauthorized use is strictly prohibited.
Risk of Noise Induced Hearing Loss: The ADT Security Hub is equipped with a warning siren. Exposure to high sound levels or prolonged exposure to the warning siren can result in Noise Induced Hearing Loss (NIHL). Avoid installing the SmartThings Hub near or inside sources of metal, radio or electromagnetic interference. Health, Safety and Regulatory Guide WARNING: No user-serviceable parts inside. Refer all servicing to qualified service personnel.
Information to the User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
