Installation Instructions
end customer. If you have any questions about our warranty,
please ask your dealer to determine the nature and scope of
his warranty. Nortek Security & Control LLC does not assume,
and is not responsible for, any real or consequential damages
from claims against the performance of our product, nor is it
liable for any costs related to loss of life, properly, or revenue.
Further, Nortek Security & Control LLC is in no way responsible
for installation of our product, and will assume no costs related
to reinstallation or removal. Nortek Security & Control LLC’s
Warranty is in lieu of all other warrantees, expressed or implied.
PLEASE NOTE
Nortek Security & Control LLC has devoted a great deal of time and
research in order to provide the most reliable equipment possible.
Certain limitations must be observed.
(1) MULTI-CODE radio components must conform with FCC Part 15
requirements. For this reason, the range and power of our radios
(2) As with all manufacturers, Nortek Security & Control LLC’s radios
must accept all signals that they receive. This may, in rare
(3) You should test your entire system occasionally in order to be sure
that all components are working in good order.
(4) Nortek Security & Control LLC’s dealers can provide you with
information regarding the use of our radio controls, and can provide
valuable installation and operation information, when requested.
WARNING:
manufacturer could void the user’s anthority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission (FCC) rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
INSTALLATION INTRUCTIONS
MODEL 3083
TWO CHANNEL MINI-TRANSMITTER
Congratulations! You have just purchased a Mini-Code Digital
kind on the market. With a little care this transmitter should
provide you with many years of excellent service. Please take
that setting your new transmitter will be quite an easy matter.
ACCESSING THE CODES SWITCH AND BATTERY
COMPARTMENT
The model 3083 two channel Mini-transmitter case is
composed of 2 halves which are held together by a small
phillips head screw. Removing this screw will allow access to
the code switches and the battery compartment (see diagram
#1).
INSTR,INSTL,M C3083, 2 BTN MINI-TX
P/N: 214944_Rev-BX1
INK : BLACK
MA TERIA L: 20 LB. MEA D BO N D
SIZE: 9.500" x 4.600"
SCALE: 1-1
SIDE 1 O F 2
6 1
5
®
FCC & IC Notice
This device contains licence-exempt transmitter(s) / receiver(s) that comply with
Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est
conforme aux CNR d’Innovation, Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes:
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.nortekcontrol.com