Communication Server Large System Installation and Commissioning

Configuring the system monitor Page 159 of 456
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
3 Connect the master system monitor to slave unit 1 with an NT8D46AS
cable.
4 Connect the narrow ribbon on an NT8D46AG cable from connector J2 in
the module with CPU 0 to the assigned port on the SDI card (see
Figure 64).
Figure 64
Cabling two side-by-side NTD40 shelves – system monitor to slave unit 1
and SDI port
J1
NT8D46AG
cable
To SDI port To next module
Backplane
CPU 0
553-3112
J1
To next module
Backplane
CPU 1
J2
J2
NT8D46AG cable
To system monitor/
power supply assembly
in the pedestal
To system monitor/
power supply assembly
in the pedestal
NT8D46AA
cable