Manualshelf

Communication Server Large System Installation and Commissioning

ManualsBrandsNortel Networks ManualsServer1000M
351352353354355356357358359360
Installing earthquake bracing Page 357 of 456
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
Figure 123
Adding spacers to columns
7 Go to “Positioning and leveling the system” on page 357.
End of Procedure
Positioning and leveling the system
The following tools are required to position and level the system:
• socket wrench (anchor bolts)
— 28mm (11/8in.) for Kit A
— 24 mm (15/16 in.) for Kit B
• 16 mm (5/8 in.) socket wrench (pedestal bolts)
Procedure 68
Leveling the system
1 Loosen the anchor bolts until the mounting plates are free to move.
2 Starting from one end of the line-up, move a column into position.
553-5383
Attach spacers to one side of each column (except the end column)
(end column)
Spacers
Spacers