Communication Server Large System Installation and Commissioning

Page 372 of 456 Adding a module to a column
NN43021-310 Standard 02.01 December 2007
4 Position and secure modules:
a. Locate the positioning guides on what is now the top module in the
column (see Figure 129 on page 372). Make sure the module being
added is facing the same direction as the column.
b. Place the module being added on top of the column and adjust it until
it is seated securely on the positioning guides.
c. Secure the mounting bolts for the module.
d. Place the module that was removed on top of the module that was
added and secure it with the mounting bolts.
Figure 129
Module positioning guides
Positioning guides
Rear
Front
Opening for
cables
553-3056