Communication Server Large System Installation and Commissioning

Page 412 of 456 Installing a Signaling Server
NN43021-310 Standard 02.01 December 2007
Figure 155
Restore IP configuration
8 Do one of the following:
• If you are migrating a Leader Signaling Server (see "Signaling Server
migration" in Signaling Server: Installation and Commissioning
(NN43001-312),insert the Removable Media Device (RMD) into the
appropriate drive, and press <CR> or enter a to restore the IP
configuration data. After the restore is complete, the following system
message appears:
Done copying IP configuration to disk
The IP Telephony parameter confirmation screen appears
(Figure 156 on page 413). Go to step 12 on page 438.