Communication Server Large System Installation and Commissioning

Installing a Signaling Server Page 417 of 456
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
Figure 161
Network Routing Service (NRS) — stand-alone Signaling Server
12 Select the Network Routing Service (NRS) to be provided by this
Signaling Server. See Figure 160 on page 416 for a co-resident Signaling
Server or Figure 161 on page 417 for a stand-alone Signaling Server.
• Enter d if this Signaling Server is configured as a Coresident Leader
and is not providing an NRS. Go to step 13.
• Press <CR> or enter a if this Signaling Server is to provide an H.323
Gatekeeper and a SIP Redirect/Proxy Server.
• Enter b if this Signaling Server is to provide only an H.323
Gatekeeper.
• Enter c if this Signaling Server is to provide only a SIP Redirect/Proxy
Server.Refer to Network Routing Service Installation and
Commissioning (NN43001-564) for more information on the NRS.
Depending on the application configuration selected, either the NRS type:
Coresident Signaling Server screen or the NRS type: Standalone Signaling
Server screen appears.
CS 1000 Signaling Server Software Install Tool (sse-x.xx.xx)
=====================================================================
Please select the Network Routing Service (NRS) configuration for this
Signaling Server.
Please enter:
<CR> -> <a> - H.323 Gatekeeper and SIP Redirect/Proxy Server.
<b> - H.323 Gatekeeper only.
<c> - SIP Redirect/Proxy Server only.
Enter Choice>