Communication Server Large System Installation and Commissioning

Page 440 of 456 Installing a Signaling Server
NN43021-310 Standard 02.01 December 2007
Figure 188
Installation Tool quit confirmation
14 Enter q to close/terminate the Installation Tool and reboot the Signaling
Server.
End of Procedure
Adding a follower Signaling Server
After configuration and reboot, a Follower Signaling Server sends out
BOOTP requests and waits for a response. Since the Follower Signaling
Server is not yet configured in an IP Telephony node, there is no BOOTP
response. Do not wait for this response. Complete Procedure 80, “Adding a
Follower Signaling Server to an IP Telephony node,” on page 441 .