Communication Server Large System Installation and Commissioning

Preparing for installation Page 63 of 456
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
a. With a flat blade screwdriver, turn the lock clockwise on the two
locking latches (see Figure 17 on page 63).
Figure 17
Locking latches on the module cover
b. Simultaneously push the latches toward the center of the cover and
pull the cover toward you while lifting it away from the module.
c. Set the covers aside until the installation is complete.
3 Remove the front and rear grills from each pedestal:
a. Loosen the two captive screws that secure the grill.
b. Pull the grill forward and lift it out of the base of the pedestal (see
Figure 18 on page 64).
c. Set the grills aside until the installation is complete.
553-A0132
Turn lock screw
up to lock
Slide to
unlatch cover