Communication Server Large System Installation and Commissioning

Positioning and leveling equipment Page 73 of 456
Communication Server 1000M and Meridian 1 Large System Installation and Commissioning
Figure 22
Positioning spacer gaskets
f. Attach a spacer to one side of each module, except the end column
(see Figures 23 and 24).
— Position a spacer against the module.
— Insert one standoff between the spacer and module.
— Insert the one screw and tighten.
— Repeat the process for the remaining standoff and screws.
g. One at a time, push columns together, level, align, and attach the
other side of the spacers.
CAUTION
Damage to Equipment
Do not try to adjust the horizontal position of a
column by tightening the spacer screws. Tightening
the screws with the columns too far apart will warp
the spacer.
FrontRear
Gasket placement
553-5641