Switch User Manual

Introduction to the BayStack 410-24T Switch
309985-C Rev 00
1-61
To configure the port priority level, follow these steps:
1.
Determine the priority level you want to assign to the switch port.
User priority levels are assigned default settings in all BayStack 410-24T
switches. The range is from 0 to 7. The traffic class table can be modified,
therefore, view the settings shown in the Traffic Class Configuration screen
before setting the port priority in the VLAN Port Configuration screen.
2.
Select Switch Configuration from the BayStack 410-24T switch Main
Menu (or press w).
3.
From the Switch Configuration Menu, select VLAN Configuration
(or press v).
4.
From the VLAN Configuration Menu, select Traffic Class Configuration
(or press t).
The Traffic Class Configuration screen opens (Figure 1-37
).
Figure 1-37. Default Traffic Class Configuration Screen Example
Traffic Class Configuration
User Priority Traffic Class
------------- -------------
Priority 0: [ Low ]
Priority 1: [ Low ]
Priority 2: [ Low ]
Priority 3: [ Low ]
Priority 4: [ Low ]
Priority 5: [ Low ]
Priority 6: [ Low ]
Priority 7: [ Low ]
Use space bar to display choices, press <Return> or <Enter> to select choice.
Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.