Water System User Manual

Chapter 1 Device Manager basics 33
Reference for the BayStack 380-24F Gigabit Switch Management Software
Editing objects
You can edit objects and values in the Device Manager device view in the
following ways:
• Select an object and, on the toolbar, click the Edit Selected button.
The edit dialog box opens for that object.
• From a switch or port shortcut menu, choose Edit. The edit dialog box opens
for that object.
When you change the value in a box, the changed value is displayed in bold.
However, changes are not applied to the running configuration until you click
Apply.
Working with statistics and graphs
Device Manager tracks a wide range of statistics for each port. You can view and
graph statistics for a single object or multiple objects. For information about the
statistics tracked for the switch and ports, refer to “Statistics for single and
multiple objects” on page 37 and “Graphing chassis statistics” on page 63.
This section describes the types of statistics and graphs available, the graph dialog
boxes, and the procedure for creating a graph.
Note: Many dialog boxes contain a Refresh button. After you apply
changes to fields, click Refresh to display the new information in the
dialog box.