Water System User Manual

80 Chapter 3 Configuring and graphing ports
214393-A
STG tab for a single port
In the Spanning Tree Group (STG) tab, you can view the status and modify the
configuration of a port’s spanning tree parameters.
To view the STG tab:
1 Select the port you want to edit.
2 Do one of the following:
• Double-click the selected port.
• From the shortcut menu, choose Edit.
• From the Device Manager main menu, choose Edit > Port.
• On the toolbar, click Edit.
The Port dialog box for a single port opens (Figure 35 on page 76) with the
Interface tab displayed.
3 Click the STG tab.
The STG tab opens (Figure 37).
Figure 37 Edit Port dialog box — STG tab