Water System User Manual

Chapter 4 Setting up MultiLink Trunk ports 99
Reference for the BayStack 380-24F Gigabit Switch Management Software
Adding ports to a MultiLink Trunk
To add ports to an existing MLT:
1 From the Device Manager menu bar, choose VLAN > MLT.
The MLT dialog box opens (Figure 44 on page 98).
2 Double-click the PortMembers field.
The PortMembers dialog box opens (Figure 45).
Figure 45 PortMembers dialog box
3 Click the port numbers you want to add.
4 Click OK.
5 In the Enable column, select True to enable your selection.
MultiLink Trunk statistics
To view MLT interface statistics:
1 From the Device Manager menu bar, choose VLAN > MLT.
The MLT dialog box opens (Figure 44 on page 98).
2 Select an MLT row and then click Graph.
The Statistics, MLT window (Figure 46) opens with the Interface tab
displayed.