User Manual
Table Of Contents
- Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
- Release 3.0.0.0
- Preface
- Chapter 1 Overview
- Chapter 2 Quick start software installation
- Chapter 3 Driver and utility software installation and uninstallation
- Chapter 4 Configuring basic network settings
- Chapter 5 Configuring network security
- Chapter 6 Upgrading the driver and utility software
- Appendix A Troubleshooting guidelines
- Appendix B Specifications
- Frequency band
- Modulation technique
- Host interface
- Operating channels supported
- Operating voltage
- Power consumption
- Current consumption
- Output power
- Operating systems support ed
- Dimensions
- Security
- Operation mode
- Transfer data rate
- Operating temperature
- Storage temperature
- Humidity
- Compliance standards
- Media access protocol
- Mechanical specification
13
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
Preliminary Draft - Nortel Networks Confidential
Preface
This guide contains detailed instructions for installing and configuring the Nortel
Networks WLAN - Mobile Adapter 2202 (Mobile Adapter 2202).
Chapter 1 provides product overview information and information about what you
need to do before you begin the installation process. Chapters 2 through 4 provide
installation and configuration information and procedures. Chapter 5 provides
instructions for upgrading the Nortel Networks WLAN - Mobile Adapter 2202
driver and utility software. Appendix A provides trouble-shooting tips, and
Appendix B contains a list of product specifications.
To ensure successful installation and configuration, complete the installation and
configuration procedures in the order in which they are presented in this installing
and using guide. Do not skip around within the procedures or between chapters.
Text conventions
This guide uses the following text conventions:
angle bracket (>) Indicates a series of selections to be made from a group
of linked menus.
Example: Select Start > Control Panel > System.
bold text
Indicates command names and button names, and data
or text that you need to enter.
Example: Click on OK. Then, click on Finish.
Example: Enter
alphanet.