User Manual
Table Of Contents
- Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
- Release 3.0.0.0
- Preface
- Chapter 1 Overview
- Chapter 2 Quick start software installation
- Chapter 3 Driver and utility software installation and uninstallation
- Chapter 4 Configuring basic network settings
- Chapter 5 Configuring network security
- Chapter 6 Upgrading the driver and utility software
- Appendix A Troubleshooting guidelines
- Appendix B Specifications
- Frequency band
- Modulation technique
- Host interface
- Operating channels supported
- Operating voltage
- Power consumption
- Current consumption
- Output power
- Operating systems support ed
- Dimensions
- Security
- Operation mode
- Transfer data rate
- Operating temperature
- Storage temperature
- Humidity
- Compliance standards
- Media access protocol
- Mechanical specification
20 Chapter 1 Overview
216669-A
Preliminary Draft - Nortel Networks Confidential
• 1 Nortel Networks WLAN - Mobile Adapter 2202 adapter card
• 1 installation software CD
• 1 documentation CD
System requirements
Before you install the Mobile Adapter 2202 in your laptop or Desktop PC, verify
that it has the following features:
• A 32-bit CardBus slot
• 32 MB memory or greater
• 300 MHz processor or higher
• Microsoft Windows 2000 or Windows XP operating system (with latest
software patches and updates)
Note: Nortel Networks WLAN - Mobile Adapter 2202 release 3.0.0.0
includes version 3.0.0.0 of the Mobile Adapter 2202 driver and version
3.0.0.0 of the Mobile Adapter 2202 utility.
Note: Nortel Networks WLAN - Mobile Adapter 2202 release 3.0.0.0 is
only available via download from the Nortel Networks support site
(www.nortelnetworks.com/support). For installation instructions, see
“Installing the driver and utility software” on page 25.