User Manual
Table Of Contents
- Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
- Release 3.0.0.0
- Preface
- Chapter 1 Overview
- Chapter 2 Quick start software installation
- Chapter 3 Driver and utility software installation and uninstallation
- Chapter 4 Configuring basic network settings
- Chapter 5 Configuring network security
- Chapter 6 Upgrading the driver and utility software
- Appendix A Troubleshooting guidelines
- Appendix B Specifications
- Frequency band
- Modulation technique
- Host interface
- Operating channels supported
- Operating voltage
- Power consumption
- Current consumption
- Output power
- Operating systems support ed
- Dimensions
- Security
- Operation mode
- Transfer data rate
- Operating temperature
- Storage temperature
- Humidity
- Compliance standards
- Media access protocol
- Mechanical specification
25
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
Preliminary Draft - Nortel Networks Confidential
Chapter 3
Driver and utility software installation and
uninstallation
Installing the driver and utility software
Perform the following procedure to install the Nortel Networks WLAN - Mobile
Adapter 2202 driver and utility software from the software installation CD.
To install the Mobile Adapter 2202 from the installation CD:
1 Insert the software installation CD in the CD_ROM drive.
2 Open the software folder to display the setup.exe file.
3 Double-click on setup.exe to start the InstallShiled Wizard, begin the
installation setup process, and launch the Nortel Networks WLAN - Mobile
Adapter 2202 Installation Program (Figure 4).
Warning:
To protect your computer’s configuration, you must follow the installation
instructions for the specific Windows installation you are running.
Note: You can insert the adapter card now. Inserting the adapter card will
display the Found New Hardware Wizard. If this occurs, click on Cancel
and continue with the installation.