User Manual

44 Chapter 4 Configuring basic network settings
216669-A
Preliminary Draft - Nortel Networks Confidential
Figure 31 Auto Profile Selection Management window
2 To add a profile to the list used for auto selection, highlight the profile name
and click on the Add button. Repeat this step for each profile you want to add
to the Auto Selected Profiles list.
3 To remove a profile form the Auto Selected Profiles list and return it to the
Available Profiles section, highlight the profile name and click on the Remove
button.
4 To change the order of the profiles in the list, highlight a profile name and use
the Move up or Move down buttons as appropriate until the profiles appear in
the order in which you want the utility to scan for an access point to associate
with. The utility will use the profiles in order, from the top of the list to the
bottom of the list.
5 Click on OK to save the list and return to the Profile Management tab.
6 Select the Auto Select Profiles check box to activate the Auto Profile
Selection feature.