User Manual

Chapter 5 Configuring network security 57
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
Preliminary Draft - Nortel Networks Confidential
4 Specify a user name for inner PEAP tunnel authentication:
Select Use Windows User Name to use the Windows user name as the EAP
user name. Otherwise, enter an EAP user name in the User Name field to use
a different user name and password and start the EAP authentication process.
5 Click on the Advanced button and:
• Leave the Server name field blank for the client to accept a certificate
form any server with a certificate signed by the authority listed in the
Network Certificate Authority drop-down list. (recommended method)
• Enter the domain name of the server from which the client will accept a
certificate.
• The login name for PEAP tunnel authentication fills in automatically as
PEAP-xxxxxxxxxxxx, where xxxxxxxxxxxx is the computer’s MAC
address. Change the login name if needed.
6 Click on OK to save the security settings for the profile and return to the
Profile Management window.
7 To enable the profile, highlight the profile and click on the Activate button.
WPA Passphrase (WPA-PSK) security
To use WPA passphrase security, access the Security tab in the Profile
Management window of the Mobile Adapter 2202 Utility and perform the
following steps:
1 On the Profile Management window, click on New or Modify to edit the
security settings.
2 Select a profile to edit, or enter a name for the new profile in the Profile
Management window, and enter the SSID of the AP to which the station
connects.
3 On the Security tab, select the WPA Passphrase radio button (Figure 41).