User Manual

Chapter 5 Configuring network security 59
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
Preliminary Draft - Nortel Networks Confidential
5 Enter the WPA passphrase and click on OK. (For ASCII text, enter 8-63
characters. For hexadecimal, enter 64 hexadecimal digits.)
6 Click on OK to save the security settings for the profile and return to the
Profile Management window.
7 To enable the profile, highlight the profile and click on the Activate button.
Pre-Shared Key (Static WEP) security
To use Pre-Shared Key (Static WEP) security, access the Security tab in the
Profile Management window of the Mobile Adapter 2202 Utility and perform the
following steps:
1 In the Profile Management window, click on New or Modify to edit the
security settings.
2 Select a profile to edit, or enter a name for the new profile in the Profile
Management window, and enter the SSID of the AP to which the station
connects.
3 On the Security tab, select the Pre-Shared Key (Static WEP) radio button
(Figure 43).