User Manual
Table Of Contents
- Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
- Release 3.0.0.0
- Preface
- Chapter 1 Overview
- Chapter 2 Quick start software installation
- Chapter 3 Driver and utility software installation and uninstallation
- Chapter 4 Configuring basic network settings
- Chapter 5 Configuring network security
- Chapter 6 Upgrading the driver and utility software
- Appendix A Troubleshooting guidelines
- Appendix B Specifications
- Frequency band
- Modulation technique
- Host interface
- Operating channels supported
- Operating voltage
- Power consumption
- Current consumption
- Output power
- Operating systems support ed
- Dimensions
- Security
- Operation mode
- Transfer data rate
- Operating temperature
- Storage temperature
- Humidity
- Compliance standards
- Media access protocol
- Mechanical specification
71
Installing and Using the Nortel Networks Wireless LAN Mobile Adapter 2202
Preliminary Draft - Nortel Networks Confidential
Appendix B
Specifications
This appendix provides technical specifications for the Nortel Network Wireless
LAN Mobile Adapter 2202.
Frequency band
802.11a Radio: 5 GHz
4.90 - 5.00GHz for Japan
5.15 - 5.25GHz (lower band) for US/Canada, Japan
5.25 - 5.35GHz for US/Canada
5.4 - 5.725GHz for Europe
5.725 - 5.850GHz for US/Canada
802.11g Radio: 2.4 GHz
802.11b Radio: 2.4 GHz
USA - FCC 2412-2462MHz (Ch1-Ch11)
Canada - IC 2412-2462MHz (Ch1-Ch11)
Europe - ETSI 2412-2472MHz (Ch1-Ch13)
Japan - STD-T66/STD-33 2412-2484MHz (Ch1-Ch14)
Frequency selection will vary according to current local regulations.
Modulation technique
Direct Sequence Spread Spectrum (DSSS) (with CCK, BPSK, QPSK modulation) and
Orthogonal Frequency Division Multiplexing (OFDM) for 2.4 GHz
Orthogonal Frequency Division Multiplexing (OFDM) subcarrier (with BPSK, QPSK, 16-QAM,
64-QAM modulation) for 5 GHz