User's Manual
Table Of Contents
- External-Antenna Nortel Networks WLAN - Access Point Quick Installation Guide
- ATTENTION!
- Overview
- Step 1: Collecting Required Tools and Supplies
- Step 2: Configuring the Nortel Networks WLAN - Access Point or Remote Edge Access Point Before Installation
- Step 3: Preparing Mounting Locations
- Step 4: Mounting the Nortel Networks WLAN - Access Points
- Step 5: Returning MAC Information
- Planning Notes
- Safety Considerations
March 16, 2004 14
Step 3: Preparing Mounting Locations
Step 3: Preparing Mounting LocationsSt ep 3: Preparing Mounting Locations
On your map, you should have the Nortel Networks WLAN - Access Point locations, mounting options,
and power options.
• Find the required mounting locations.
• Use the ceiling-mount base to mark the wall or ceiling locations for sheet metal, drywall, or
other screws. Make sure you leave enough space around the Nortel Networks WLAN - Access
Point and base to plug the CAT-5 cable, optional external antenna cable(s), optional power
supply cable, and optional Kensington MicroSaver Security Cable into the sides of the Nortel
Networks WLAN - Access Point.
Figure - Factory-Supplied Mounting Options
• Alternatively, attach the hanging ceiling clips to the Nortel Networks WLAN - Access Point. Make
sure you leave enough space around the Nortel Networks WLAN - Access Point to plug the
CAT-5 cable, optional external antenna cable(s), optional power supply cable, and optional
Kensington MicroSaver Security Cable into the sides of the Nortel Networks WLAN - Access
Point.
• Alternatively, use the optional mounting bases and/or brackets to mark the wall or ceiling
locations for sheet metal, drywall, or other screws. Make sure you leave enough space around
the Nortel Networks WLAN - Access Point and brackets to plug the CAT-5 cable, optional