User's Manual
Table Of Contents
- External-Antenna Nortel Networks WLAN - Access Point Quick Installation Guide
- ATTENTION!
- Overview
- Step 1: Collecting Required Tools and Supplies
- Step 2: Configuring the Nortel Networks WLAN - Access Point or Remote Edge Access Point Before Installation
- Step 3: Preparing Mounting Locations
- Step 4: Mounting the Nortel Networks WLAN - Access Points
- Step 5: Returning MAC Information
- Planning Notes
- Safety Considerations
March 16, 2004 24
Step 5: Returning MAC Information
Step 5: Returning MAC InformationStep 5: Returning MAC Information
When you have completed the installations as outlined in Step 4: Mounting the Nortel Networks WLAN -
Access Points, return the MAC addresses and their locations on the maps or floor plans to the network
planner or manager. The Nortel Networks WLAN - Solution Management System Software (Solution
Management System Software) operators will use the MAC address and location information to create
maps for precise wireless Operating System management.
Also return any unused mounting kit hardware and external power supplies to the network planner or
manager for use in future deployments.
Note: Please remind the Network Planner or Manager that now is a good time to register the
Nortel Networks WLAN - Access Points at http://www.nortelnetworks.com/.