User's Manual
Table Of Contents
- External-Antenna Nortel Networks WLAN - Access Point Quick Installation Guide
- ATTENTION!
- Overview
- Step 1: Collecting Required Tools and Supplies
- Step 2: Configuring the Nortel Networks WLAN - Access Point or Remote Edge Access Point Before Installation
- Step 3: Preparing Mounting Locations
- Step 4: Mounting the Nortel Networks WLAN - Access Points
- Step 5: Returning MAC Information
- Planning Notes
- Safety Considerations
March 16, 2004 4
Step 1: Collecting Required Tools and Supplies
Step 1: Collecting Required Tools and SuppliesStep 1: Collecting Requ ired Tools and Supplies
• One Nortel Networks WLAN - Access Point or Remote Edge Access Point per location.
• Nortel Networks WLAN - Access Point and Remote Edge Access Point Mounting Kits,
factory-supplied with each Nortel Networks WLAN - Access Point.
• Optional Nortel Networks WLAN - Access Point and Remote Edge Access Point Mounting Kits,
factory-orderable.
• Optional external AC-to-DC power supplies, factory-orderable.
• Optional external 802.11b/g antennas.
Note: Refer to the Nortel Networks 2200 series Release Notes for 802.11a external antenna
information. Contact Nortel Networks for a list of approved 802.11a and 802.11b/g external
antennas.
• Map showing Nortel Networks WLAN - Access Point and Remote Edge Access Point locations,
and mounting and power options.
• Screwdrivers, drills, and ladder.
• An assortment of sheet metal and drywall screws and toggle bolts.
• CAT-5 (or higher) cables to connect the Nortel Networks WLAN - Access Point and Remote Edge
Access Point locations and the (UNUSED PRODUCT) or other network device.
• Optional Kensington MicroSaver Security Cable to secure each Nortel Networks WLAN - Access
Point and Remote Edge Access Point.
Continue with Step 2: Configuring the Nortel Networks WLAN - Access Point or Remote Edge Access
Point Before Installation.