- Nortel Ethernet Routing Switch Owner's Manual

262 Configuring the switch using Device Manager
The Chassis dialog box appears with the System tab displayed.
3
Click the Base Unit Info tab.
The Base Unit Info tab appears.
—End—
The following table describes the Base Unit Info tab fields.
Table 118
Base Unit Info tab fields
Field Description
Type The switch type.
Descr A description of the switch hardware, including number of
ports and transmission speed.
Ver The switch hardware version number.
SerNum The switch serial number.
LstChng The value of sysUpTime at the time the interface entered
its current operational state. If the current state was
entered prior to the last reinitialization of the local network
management subsystem, the value is zero.
AdminState
Administrative state of the switch. Select either enable
or reset.
ATTENTION
In a stack configuration, Reset only resets the base unit.
OperState The operational state of the switch.
Location Type the physical location of the switch.
RelPos The relative position of the switch.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.