- Nortel Ethernet Routing Switch Owner's Manual

272 Conﬁguring the switch using Device Manager

—End—

Working with conﬁguration ﬁles

This chapter describes how you can view information and upload or

download the conﬁguration and image ﬁles.

FileSystem dialog box

To open the Edit FileSystem dialog box, use the following procedure:

→

From the Device Manager main menu, choose Edit > File System.

The FileSystem dialog box appears and displays the Config/Image/Diag

tab.

Figure 94

FileSystem - Conﬁg/Image/Diag File tab dialog box

Table 122 "FileSystem Conﬁg/Image/Diag ﬁle dialog box ﬁelds" (page

272) describes the FileSystem Conﬁg/Image/Diag ﬁle dialog box ﬁelds.

Table 122

FileSystem Conﬁg/Image/Diag ﬁle dialog box ﬁelds

Field Description

LoadServerAddr The IP address of the load server for the configuration file

and/or the image file. If not used, then the value is 0.0.0.0.

BinaryConfigFileN

ame

Name of the configuration file currently associated with the

interface. When not used, the value is a zero length string.

Nortel Ethernet Routing Switch 2500 Series

Overview — System Conﬁguration

NN47215-500 (323162-B) 02.02 Standard

4.1 19 November 2007