- Nortel Ethernet Routing Switch Owner's Manual

Viewing and editing multiple port configurations 307
Field Description
OperDuplex The current mode of the port (half duplex or full duplex).
AdminSpeed Set the port’s speed.
OperSpeed The current operating speed of the port.
AutoNegotiationCapability Specifies the port speed and duplex capabilities that a switch can
support on a port, and that may be advertised by the port using
auto-negotiation.
AutoNegotiation
Advertisments
Specifies the port speed and duplex abilities to be advertised during
link negotiation.
MltId The MultiLink Trunk to which the port is assigned (if any).
IsPortShared Specifies whether a port is shared. Multiple ports that are logically
represented as a single port are shared. Only one shared port may
be active at a time.
PortActiveComponent Specifies the physical port components that are active for a shared
port.
•
"Viewing and editing multiple port configurations" (page 307)
•
"Interface tab for multiple ports" (page 308)
Viewing and editing multiple port configurations
To view or edit the configurations of multiple ports:
Step Action
1
Select the ports you want to edit.
Press Ctrl+left click the ports you want to view or configure. A
yellow outline appears around the selected ports.
2
Do one of the following:
•
From the shortcut menu, choose Edit.
•
From the Device Manager main menu, choose Edit > Port.
•
From the shortcut menu, choose Edit.
•
From the toolbar, click Edit.
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.