- Nortel Ethernet Routing Switch Owner's Manual

314 Administering the switch using web-based management
Table 141
Items on the Quick Start page
Section
Item Description
In-Band Switch
IP Address
Specify a new IP address for the
switch.
In-Band Subnet
Mask
Enter a new subnet mask.
IP
Default
Gateway
Specify an IP address for the
default gateway.
Read-Only
Community
String
Specify a character string to
identify the community string for the
SNMPv1 Read-Only community,
for example, public or private.
Re-enter character string to verify.
The default value is public.
Community
String
Read-Write
Community
String
Specify a character string to
identify the community string for the
SNMPv1 Read-Write community,
for example, public or private.
Re-enter character string to verify.
The default value is private.
Index Select the number of the Trap
Receiver to create or modify.
IP address Specify the network address for the
SNMP Manager that is to receive
the specified Trap.
Trap Receiver
Community Type the Community String for the
specified Trap Receiver. Re-enter
Community String to verify.
VLAN Quick Start
VLAN
Specify the IP of the port-based
Quick Start VLAN.
—End—
Configuring system security
For information on configuring system security, please see Nortel Ethernet
Routing Switch 2500 Series Security — Configuration and Management
(NN47215-505).
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.