- Nortel Ethernet Routing Switch Owner's Manual

CLI command modes 83
Figure 23
CLI command mode hierarchy
You can see a specific value for each command mode at the prompt line,
and you can use specific commands to enter or exit each command mode
(Table 9 "Command mode prompts and entrance/exit commands" (page
83)). Additionally, you can only enter command modes from specific modes
and only exit to specific command modes.
Table 9 "Command mode prompts and entrance/exit commands" (page
83) describes the command mode prompts and entrance/exit commands.
Table 9
Command mode prompts and entrance/exit commands
Command
mode
Sample Prompt for
the Ethernet
Switch 2500
Enter/exit command
User EXEC
(exec)
2500T>
Default mode, automatically
enter
logout or exit to quit to
Main Menu
Nortel Ethernet Routing Switch 2500 Series
Overview — System Configuration
NN47215-500 (323162-B) 02.02 Standard
4.1 19 November 2007
Copyright © 2007, Nortel Networks
.