User Guide

Chapter 4 Installing option cards and DIMMs 75
Nortel VPN Router Installation — VPN Router 2750
10 Replace the top cover on the chassis (Figure 21 on page 65).
a Hold the cover at an angle, and slide it onto the chassis.
b Insert the four screws that secure the cover to the chassis, and use the
screwdriver to tighten the screws.
11 To install the VPN Router 2750 in an equipment rack, do the following:
a Set the VPN Router 2750 on the rack-mount shelf in the rack.
b Insert one of the panhead screws through the bottom hole on each side of
the shelf into the hole in the rack, and tighten the screws (Figure 4 on
page 31).
12 Replace the front bezel (Figure 25 on page 72).
a Hold the bezel by the two handles, and push the bezel onto the chassis.
b Use the screwdriver to tighten the two screws that secure the bezel to the
chassis.