Gigabit Switch Getting Started

60 Chapter 3 Device Manager basics
214392-A
Telneting to a switch
From Device Manager, you can initiate a Telnet session to the console interface
for the switch you are currently accessing.
To Telnet to a switch:
• From the Device Manager main menu, choose Device > Telnet.
• On the toolbar, click the Telnet button.
A Telnet window to the switch opens.
Trap log
You can configure a BayStack 380-24F Gigabit Switch to send SNMP generic
traps. When Device Manager is running, any traps received are recorded in the
trap log. You set the maximum number of entries in the trap log using the
Properties window (page 40). The default number of trap log entries is 500.
To view the trap log:
• On the toolbar, click the Trap Log button.
• From the Device Manager Main Menu, choose Device > Trap Log.
Do one of the following:
Do one of the following:
Note: When you operate Device Manager from a UNIX platform, you
must be logged in as root in order to receive traps.