Nortel DECT Handset 4145Ex and 4146Ex User Guide www.nortel.
Congratulations on your new Nortel 4145Ex/4146Ex handset The handset 4145Ex/4146Ex will provide you with the greatest possible degree of flexibility and mobility due to high battery capacity, practical weight, size and design.
Please note that the handset 4145Ex/ 4146Ex is for use with the following Nortel host systems: • Norstar MICS 7.0 or greater (Modular Integrated Communications System) • Norstar CICS 7.0 or greater (Compact Integrated Communications System) • BCM 3.
Contents Getting Started . . . . . . . . . . . . . . . . . . 7 Handset information . . . . . . . . . . . . . 7 Battery information . . . . . . . . . . . . . . 8 Installing battery . . . . . . . . . . . . . . . . 9 Charging battery . . . . . . . . . . . . . . . 10 Checking battery capacity . . . . . . . 11 Battery disposal . . . . . . . . . . . . . . . 12 About your 4145Ex/4146Ex handset 13 Handset display . . . . . . . . . . . . . . . 15 Display softkeys . . . . . . . . . . . . . . . 17 Display backlight .
Getting Started Read all the information in this section before you use your handset. Handset information Ensure that the adapter voltage is the same as the electrical outlet voltage. The 4145Ex/4146Ex handset uses radio signals and does not guarantee a connection in all circumstances. Do not rely on a cordless handset to make emergency calls.
Check for small metal objects in the handset earpiece/mouthpiece before using the handset. Do not store or locate flammable liquids, gases, or explosive materials in the same compartment or vicinity as the cordless handset, its parts or accessories. Battery information Read the following information before you handle the batteries: • Do not replace the batteries in potentially explosive environments, such as rooms where flammable liquids or gases are present.
Installing battery The battery is connected to the handset when it is shipped from the factory. 1 To change the battery unscrew the plate on the rear of the handset to access the battery compartment. Use a normal screw driver. 2 Insert the screwdriver into the small crack behind the blind cover and break to open the handset. 3 Place the battery plug in the slot in the battery box. 4 Insert battery with the label readable. 5 Replace the back cover.
Charging battery When charging the battery for the first time, it is necessary to leave the handset in the charger for 14-16 hours for the battery to be fully charged. During normal operation, it takes approximately 3.5 hours to charge the handset from fully discharged to its full capacity. • Place the handset in the charger. For correct charging, be sure the room temperature is between 0°C and 25°C. Do not place the handset in direct sunlight.
If the handset is turned off when placed in charger, only the LED indicates the charging. When handset is turned off, the LED flashes at a low frequency while charging and lights constantly when the charging is finished. There will be no reaction for incoming calls. If the handset is turned on when charging, the display shows the charging status. The display goes back to normal mode when fully charged. It will not vibrate. Auto-answer is inactive. The handset reacts normally for incoming calls.
3 Press 3 to return to the menu system, or press MENU ( ) to quit. The indication on the display is not necessarily an exact reflection on the remaining speech time, but only an indication of the voltage on the battery. Battery disposal Defective batteries must be returned to a collection point for chemical waste disposal. Warning: Nickel metal hydride batteries must be disposed of properly. Do not dispose of the batteries in office or household waste. Nickel metal hydride batteries are recyclable.
About your 4145Ex/ 4146Ex handset A C C D D B F H G I J J L K E A Message indicator light Flashes when you have a message waiting. B Volume control Adjusts the handset and ringer volume. C Display Shows call information, handset status icons, and guides you through features and option menus.
E Microphone Keys F to L activate different functions when your handset is on hook or off hook. On hook: Handset is idle (not in use). Off hook: Handset is active, call or feature in progress. F Menu key On hook Enters the Handset Options menu. (idle) Off hook Activates a feature option. (active) G <( ) key On hook Enters the Redial List menu. (idle) Off hook Activates a feature option. (active) H >( ) key On hook Enters the Telephone Book menu. (idle) Off hook Activates a feature option.
Off hook Starts or ends a feature (active) session. OR Turns the loud speaker on with a long key press . R ( ) key K On hook Opens your message list with a short key press. (idle) OR Enters the text message (MSF-MAIL) menu with a long (three second) key press. Off hook Places calls on hold. (active) L On/Off hook key On hook Turns the handset on. (idle) Off hook Ends an active call. (active) Handset display There are four lines on your handset display.
The types of information shown on the display are: • Standby text: When the handset is on hook (idle), your extension name and number appears on the first line of the display. • Information text: Call or feature information appears on the second line of the display. • Feature options: Feature options appear on the third line of the display. Feature options vary, depending on the type of call or feature in use. • Handset icons: The following icons appear on the fourth line of the display: (((.
Display softkeys Three display softkeys are used to activate feature options that appear on the third line of the display. The following graphic shows the softkey mapping for feature options on the third line of the display. Display softkey mapping example NEXT CALL ERASE 1 2 3 Display Line 3 s Display softkeys softkeys Display Display backlight The display backlight automatically turns on when there is an incoming call, or if a key is pressed.
Basic handset options Turning the handset ON/OFF ON Press . When the handset is turned on the radio signal display icon is shown in the lower left corner of the display, if the handset is subscribed to a system. OFF Press 3 ( ) for 4 seconds. Adjusting speaker volume 1 Press . 2 Use the two keys placed at the upper right side of the handset for volume control. 3 Press again.
4 Press MENU ( structure. ) to exit the menu See Figure 1 on page 56. Customizing handset The handset has one user-defined profile (set up), and a mode where all sounds are disabled (SILENT). • Press MENU ( ) followed by 3 to show the profile. All settings have to be defined under the profile. The display shows if the SILENT mode is enabled. Profile set-up In the following you will find a description of how to set up the profile. 1 Press MENU ( ) to enter the PROFILE SET UP MENU. 2 Press 3.
Description of profile functions RINGERTONE: Scroll through the 9 different ringertones using < and >. Confirm with 3. RINGER VOL: Turn the volume up and down using < or >. Confirm with 3. KEY CLICK: Turn the volume up and down using < and >. Confirm with 3. VIBRATOR: Can be turned on/off using < and >. Confirm with 3. Auto-ANSWER: Can be turned on/off using < and >. Confirm with 3. When turned on, the telephone automatically goes off hook when ringing.
AUTO KEYLOCK: The auto keylock function can be turned on/off using < and >. Confirm with 3. With auto keylock turned on the handset will automatically lock the keys after 60 seconds. Press MENU ( ), then press º to activate the keys again. Language: Choose between predefined languages using < and >. Confirm with 3. BACKLIGHT: Can be turned on/off using < and >. Confirm with 3. Refer to “More handset options” on page 27 for more information on the menu.
Making and answering calls The handset must be subscribed and registered to make or answer a call. (Contact your system administrator to have your handset subscribed). For internal calls, dial the extension number. (Contact your system administrator for a list of extension numbers). For external calls, dial the external code (or line pool code) to access an external line, then dial the external telephone number. (Contact your system administrator to confirm what external code or line pool code to use).
Dial from your phone book 1 Press > ( ) to enter the telephone book. 2 Search for the number either by using the < > -keys, or by pressing the first letter in the name by using the digits 2 – 9. 3 Press , the display icon flashes until the call is connected. 4 Press again to end the call. Note: For more information on using your phone book, refer to “Using phone book” on page 30. Redial The handset has maximum 10 redial numbers. Each number is only represented once. 1 Press < ( list.
Answering calls Depending on the system hardware/ software configuration, Call Display information (CLID) for incoming external calls will appear on the display. Your system administrator must enable the CLID feature for your handset in system programming. To answer a call: • Press to answer a call when your handset rings. • If you are using headset, press any key on the handset to answer the call. To stop the handset ringing without answering the call: • Press and the ring signal is muted.
Making or answering a second call You can have two calls active at the same time. Use R ( ) to switch between calls. To answer a second call while on another call • Press R ( ) to answer the second call. The first call is automatically put on hold. To hold a call and make a second call 1 Press R ( hold. ) to put the first call on 2 Dial the telephone number of the second call. To return to the first call • Press R ( first call. ) again to return to the The second call is automatically put on hold.
Replying to messages This allows you to read messages from another DN (Directory Number) in the system or to listen to voice-mail messages. The red LED on your handset flashes when you receive a message from an internal voice message center or another telephone on your system. This is the message waiting indication. To view, reply and listen to your messages 1 While on hook, press R ( ) (short key press) to access your message list. 2 Press NEXT to view all messages in the list.
More handset options Moving around in the Menu Press MENU ( ) to enter or exit the menu structure. It has to be used if a “NO” or “CLEAR” is wanted in the menu structure. Press 3 to jump to a lower level in the menu. When the lowest menu level is reached, it will store the setting and jump to a higher level. It has to be used if a “YES” is wanted. Note: If the handset is in the menu, and an incoming call arrives, then the menu will be dropped and the call handled in the normal way. See Figure 3 on page 58.
MENU REDIAL The handset has maximum 10 redial numbers. Each number is only represented once. • Press MENU ( ), press > four times from standby text to enter the REDIAL MENU, and then press 3. Repeated presses at < turn backward through the dialled numbers (from newest to the oldest). Right arrow moves in the opposite direction. Note: It is also possible to reach the REDIAL MENU, using the < ( ) key. • Numbers are named “REDIAL” or with the name.
MENU LOGIN For more information on this menu option, contact your system administrator. MENU MSF FUNCTION MSF Functions are special functions, which are based on MSF (Message Service Function). The functions require special software in the main system. Note: The PHONE BOOK MENU, REDIAL MENU and MSF-MAIL MENU can be accessed directly. The PHONE BOOK MENU by pressing > ( ), the REDIAL MENU by pressing <( ), and the MSF-MAIL MENU by pressing R ( ) with a long key press.
Using phone book You can store telephone numbers and names in your telephone book. The telephone book can store up to 80 numbers with name. A maximum of 23 digits, including spaces, is allowed for each number. A maximum of 24 digits, including spaces, is allowed for each name. Names are sorted alphabetically starting with their first character. Using the alphanumeric keyboard The normal dialling keys (0-9) are used for writing the name to be placed in the telephone book.
Key Capital letter Small letter 1 ?!1-+*/ = &()%¿¡ 2 ABC2ÄÅÀ abc2äåàáã ÁÃÆÇ æç 3 DEF3ÈÉÊ Ë def3èéêë 4 GHI4ÌÍÎÏ ghi4ìíîï 5 JKL5 jkl5 6 MNO6ÑÖ ÒÓÔÕØ mno6ñöòó ôõø 7 PQRS7ß pqrs7ß 8 TUV8ÜÙÚ tuv8üùúû Û 9 WXYZ9 0 [Space] , . 0 : ; [Space] , . 0 : ; _”‘^~ _”‘^~ * AÆa # #@€$£¥§< #@€$£¥§< >{|}[\] >{|}[\] ?!1-+*/ = &()%¿¡ wxyz9 aÆA Storing a number 1 While on hook, press the number to be stored (max. 23 digits), press >, and then press 3. 2 Enter a name (max.
3 If the display shows “MEMORY FULL”, it is necessary to delete one or more numbers from the telephone book. See Figure 5 on page 60. Storing from Redial list 1 While on hook, use the < -key to find the number in the redial list to be stored in the telephone book. 2 Press 3, then >, and then press 3 again. 3 Enter a name, and then press 3 to store the redial list number in the telephone book.
4 Press MENU ( ) to exit the telephone book. Note: Viewing and editing the telephone book can also be done while in conversation (off hook) by pressing > ( ) with a long key press. See Figure 6 on page 61. Changing numbers 1 While on hook, press > ( ) to enter the telephone book. 2 Use the < > -keys to find the number to be edited, press 3, press >, then press 3. 3 Edit the number, and then press 3 to store the number.
Deleting numbers 1 While on hook, press > ( ) to enter the telephone book. 2 Use the < > -keys to find the number to be deleted, press 3 twice. See Figure 6 on page 61. Deleting from Redial list • While on hook, press < ( ), then use the < > -keys to find the name/ number to be deleted, and press 3 twice. The name/number is now deleted. If number is stored, it is moved to the telephone book. Using text messages (MSF) It is possible to send text messages from handset to handset on the same system.
• If the message contains a callback number, this will be displayed on the bottom line of the display. As long as the callback number is in the display, it is possible to activate the number by pressing . • 1st letter in the display, in front of the timestamp, shows the message status: read (R), unread (N) or locked (L). • Mails include a maximum of 72 letters or digits. Call back no. is max 23 digits (or letters for E-mail). • 14 messages can be ”stored” in the handset.
Replying a MSF mail 1 While on hook, press R ( ) to open the mail, then 3, press 3 again and use the < > -keys to find the reply feature, press 3 and you are now able to reply the mail. 2 After writing your reply, press 3 to confirm. Forwarding a MSF mail 1 While on hook, press R ( ) to open the mail, then 3, press 3 again and use the < > -keys to find the forward feature, press 3 twice and you are now able to dial the number on the receiver. 2 Press 3 to confirm.
Locking/unlocking a MSF mail When locking a message, the message will not automatically be overwritten when receiving a new message. If unlocked, the oldest message will be deleted when receiving a new message. 1 While on hook, press R ( ) to open the mail, then 3, press 3 again and use the < > -keys to find the lock/unlock feature 2 Press 3 and the mail is locked/ unlocked.
Shortcuts ”SILENT”: Press: MENU ( ) followed by #. (No sounds) (Display shows SILENT) ”KEY LOCKED”: Press: MENU ( ) followed by º. (Display shows KEY LOCKED) “PHONE BOOK”: Press > ( hook). ) (in on Name search in telephone book: Press the first letter in name. Store a number: Press > ( number (in on hook). “REDIAL”: Press < ( ) after the ) in on hook. Check messages: Short Press R ( in on hook. “MSF-MAIL”: Long Press R ( hook.
General information Troubleshooting The telephone freezes. Remove and replace the battery pack. Press to turn on the telephone. The telephone does not ring. Check whether the ringer is SILENT or RINGER VOL. is OFF. Not possible to turn on the telephone. Check if battery is connected. If yes, charge the battery. The telephone turn off when receiving a call and going off-hook. Charge the battery. If still a problem change the battery as it might be defective.
IP64 class: IEC 60529 (IP54) EN50014/IEC 60079-0 EN50020/IEC 60079-11 Enclosed potection (dust tight): IEC 6059 (2001-02), Ed. 2.1, IP6x Enclosed potection (splashing): IEC 6059 (2001-02), Ed. 2.1, IPx4 Size and weight Size: 148 x 50 x 28 mm Weight: 130 g incl.
wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool 5. Slots or openings in the equipment are provided for ventilation to protect it from over-heating. These openings must not be blocked or covered. 6. The product should be operated only from the type of power source indicated on the instructions. If you are not sure of the type of power supply, consult your dealer or local power company. 7.
These appliances may cause electrical interference to the base or handset 14.The charger must be placed on a hard, flat surface and connected to a functional 120 volt AC power source depending on the country of use. 15.This telephone will not operate in the event of a blackout. Please keep a backup phone for emergencies Exposure to sunlight, heat and moisture Do not expose the cordless phone to direct sunlight for long periods. Keep the cordless phone away from excessive heat and moisture.
5. Do not use non-Nortel charging devices. This could damage the batteries Warning: Do not charge DECT Handset 4145Ex/4146Ex in a potentially explosive atmosphere. Use only the dedicated charger N0018956 (orange) for charging of DECT Handset 4145Ex/4146Ex. Warning: The battery must not be removed in a potentially explosive atmosphere. Notices Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company.
If your telephone equipment causes harm to the telephone network, the telephone company may ask you to disconnect the system from the line until the problem has been corrected or they may discontinue your service temporarily. If possible, they will notify you in advance, But if advance notice is not practical, you should be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.
— Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. Power Outage: In the event of a power outage, your cordless telephone will not operate. The cordless telephone requires electricity for operation.
EC Declaration of Conformity Manufacturer: KIRK telecom A/S Langmarksvej 34 8700 Horsens Denmark Product DECT Handset 4145Ex/4146Ex ATEX handset Type 0238 02XX Type number XX can vary (numbers and letters) depending on software and design. Telecom requirements The transceivers described above comply with the essential requirements of the R&TTE directive 99/5/ EC if used for the intended purpose.
Applied standards Standards Date EN 60950 Health and Safety requirements 2000-1 EN 301 489-1 2001-09 Electromagnetic Compatibility requirements EN 301 489-6 2000-09 Electromagnetic Compatibility requirements TBR 22 Generic Access Profile (GAP) 1997 TBR 10 General Terminal Attachment requirements 1999 TBR 6 General Terminal Attachment requirements 1999 Application, Intended purpose The DECT Handset 4145Ex/4146Ex is a DECT based handset, designed to be used in connection with Nortel Networks wirele
Meaning of Conformity For the application of the equipment in areas which have a potentially explosive atmosphere, the manufacturer declares on his own responsibility that under the claimed type of protection the equipment is in conformance with the relevant European harmonized standards. The equipment may only be used under conditions that are mentioned in the ATEX and IEC Type Examination Certificate.
Notified Body Identification number: 0539 Examination Certificate EN: DEMKO 04 ATEX 136204 X IEC: IECEx ULD 04.0001 X Validity This declaration is only valid if accompanied with an EC Type Examination Certificate obtained from a Notified Body or from a competent authority in an EU member state. Quality Assurance The product is designed and produced by a manufacturing organisation, which is certified on ISO 9001: 2000 and ISO 14001: 1996 standards.
Technical Director: Erik Stridbæk Signed: Date: 10-09-2004 Quality Manager: Søren E. Mikkelsen Signed: Date: 10-09-2004 Safe use of the ATEX approved DECT Handset 4145Ex/4146Ex For safe use of the ATEX approved DECT Handset 4145Ex/4146Ex, remember the following: The DECT Handset 4145Ex/4146Ex is developed for use in potentially explosive working environments, as defined by local fire protection authorities. The handset complies with the ATEX directive 94/9/EC as well as IEC standards.
• Please consult your system administrator for instruction before using DECT Handset 4145Ex/ 4146Ex. • Do not open DECT Handset 4145Ex/4146Ex in a potentially explosive atmosphere. • Use only the dedicated charger NTTQ47MA (orange) for charging DECT Handset 4145Ex/4146Ex. • Do not charge DECT Handset 4145Ex/4146Ex in a potentially explosive atmosphere. • The AC power adaptor used in connection with the charger must not be connected to a higher voltage than 250V AC.
• If defects occur, remove DECT Handset 4145Ex/4146Ex immediately from the potentially explosive atmosphere. • Only KIRK telecom A/S may repair and service DECT Handset 4145Ex/4146Ex. • Relevant data concerning repairs must be logged. • For traceability it is advisable to keep a record of type and serial numbers and users of the handsets.
Name and adress of manufacturer DECT Handset 4145Ex/ 4146Ex Product name IP64 IP 64 classification Ex DECT Handset 4145Ex/ 4146Ex is approved according to International standards ib Intrinsic safe, ib category IIC Equipment group II, ib group C (gas group C) T3 Temperature group T3 (relevant for gas) 53
DECT Handset 4145Ex/ 4146Ex Product name IECEx International country code for notified body/year/ certification number X Special warnings concerning the use of DECT Handset 4145Ex/ 4146Ex exist, please refer to the users guide II 2G Equipment group II, zone 1 (gas) II 3D Equipment group II, zone 2 (dust) T60ºC Max.
Figure 1 Menu language
Figure 2 Menu profile set-up
Figure 3 Menu structure
Figure 4 Menu mail
Figure 5 Menu phone book - storing a number
Figure 6 Menu phone book - reading, deleting, editing a number
14147700-HD, ED1