User Guide

Using the 8-port TokenSpeed and TokenSpeed/MCP Switch Modules
3-4 893-01019-A
3. Align the left and right edges of the module in the guides on each side of
the slot (see Figur
e 3-3).
Figure 3-3. Slot module guides
4.
Slide the module into the chassis until you feel it touch the backplane
(see Figur
e 3-4).
The inserter/extractor levers should still be extended forward and in contact
with the front of the chassis. Do not push the module all the way into the
chassis.
Figure 3-4. Inserting the module into the chassis
6465
6466
TKNSPD.BK Page 4 Thursday, July 17, 1997 11:43 AM