User Guide

Installing and Connecting the TokenSpeed Module
893-01019-A 3-15
4.
Rotate the left and right inserter/extractor levers away from the center of
the module to loosen the module from the backplane connectors (see
Figur
e 3-11).
5. Slide the module out of the chassis (see Figure 3-12).
Figure 3-12. Removing the module from the Centillion chassis
6.
If you will not be replacing the module soon, attach a filler panel over the
empty slot. Otherwise, continue with step 7
.
7. Install the new module, following the instructions in “Installing the
TokenSpeed Module” on page 3-2.
6471
TKNSPD.BK Page 15 Thursday, July 17, 1997 11:43 AM