Manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 6 PPP and MP configuration
6
PPP and MP configuration
About this chapter
The following table shows the contents of this chapter.
Section Description
6.1 Introduction
This section describes concepts and fundamentals of PPP
and MP.
6.2 Encapsulating an interface
with PPP and MRU
negotiation
This section describes how to encapsulate PPP and
configure PPP MRU.
6.3 Configuring unidirectional
PAP
This section describes how to configure PAP
authentication.
See Example for configuring PAP authentication.
6.4 Configuring unidirectional
CHAP
This section describes how to configure CHAP
authentication.
See:
• Example for configuring unidirectional CHAP
authentication
• Example for configuring bidirectional CHAP
authentication
6.5 Configuring PPP optional
parameters
This section describes how to configure PPP optional
parameters.
6.6 Configuring MP direct
binding through the VT
This section describes how to configure MP direct
binding through virtual template.
See Example for configuring MP direct binding using the
VT.
6.7 Configuring MP
authentication binding through
the VT
This section describes how to configure MP
authentication binding through virtual template.
See Example for configuring MP authentication binding
using the VT.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
6-1