Manual

8 Frame relay configuration
Nortel Secure Router 8000 Series
Configuration -WAN Access
Section Description
8.7 Configuring PVC standby
groups of frame relay
switching
This section describes how to configure the PVC backup
and tunnel interface backup of FR.
See:
• Example for configuring the PVC backup of frame
relay switching.
• Example for configuring the backup of frame relay over
IP.
8.8 Configuring frame relay
over an IP network
This section describes how to configure FR over IP.
See Example for configuring frame relay over IP.
8.9 Configuring frame relay
FRF.9 compression
This section describes how to configure P2P and P2MP
FR compression.
See Example for configuring the frame relay frf9
compression.
8.10 Configuring frame relay
IP header compression
This section describes how to configure FR IP header
compression.
8.11 Configuring MFR bundle
and MFR bundle Link
This section describes how to configure MFR binding and
MFR bundle link.
8.12 Configuring MFR
restriction parameters
This section describes how to MFR fragmentation and
sliding window.
8.13 Maintaining frame relay
and MFR
This section describes how to maintain FR and MFR.
8.14 Configuration examples
This section provides several configuration examples of
FR.
8.15 Troubleshooting
This section describes how to diagnose and remove FR
faults.
8-2
Nortel Networks Inc.
Issue 5.3 (30 March 2009)