Manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 10 Low-speed ATM configuration
10
Low-speed ATM configuration
About this chapter
The following table shows the contents of this chapter.
Section Description
10.1 Introduction
This section describes concepts and applications of ATM.
10.2 Configuring ATM
interfaces
This section describes how to configure an ATM
interface.
10.3 Configuring
ATM-classes
This section describes how to configure ATM-class.
10.4 Configuring the IPoA
application
This section describes how to configure IPoA.
See Example for configuring IPoA.
10.5 Configuring the IPoEoA
application
This section describes how to configure IPoEoA.
See Example for configuring IPoEoA.
10.6 Configuring the PPPoA
application
This section describes how to configure PPPoA.
See Example for configuring PPPoA.
10.7 Configuring the
PPPoEoA application
This section describes how to configure PPPoEoA.
See Example for configuring PPPoEoA.
10.8 Creating a PVC-group
and configuring the PVC
service mapping
This section describes how to configure PVC-group and
PVC service mapping.
10.9 Configuring the service
type of PVC
This section describes how to configure PVC services.
10.10 Configuring ATM OAM
This section describes how to configure ATM OAM.
10.11 Maintaining ATM
This section describes how to maintain ATM.
10.12 Configuration examples
This section provides several configuration examples of
ATM.
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
10-1