Manual

Nortel Secure Router 8000 Series
Configuration -WAN Access 10 Low-speed ATM configuration
[RouterC-Atm1/0/0] pvc to_adsl_a 0/60
[RouterC-atm-pvc-Atm1/0/0-0/60-to_adsl_a]
[RouterC-atm-pvc-Atm1/0/0-0/60-to_adsl_a]
[RouterC-Atm1/0/0] pvc to_adsl_b 0/61
[RouterC-atm-pvc-Atm1/0/0-0/61-to_adsl_b]
map bridge virtual-ethernet 1/1/0
quit
map bridge virtual-ethernet 1/1/1
Step 2 Verify the configuration.
# Check the PVC status information on Router C.
[RouterC] display atm pvc-info
VPI/VCI |STATE|PVC-NAME |INDEX ENCAPIPROT |INTERFACE
0/60
0/61
—End
|UP |to_adsl_a
|UP |to adsl b
60
61
| SNAP
| SNAP
I ETH
I ETH
|Atm1/0/0 (UP)
|Atm1/0/0 (UP)
Configuration files
Configuration file of Router C
#
sysname RouterC
#
radius-server template shiva
radius-server authentication 100.1.1.1 1645
#
interface Virtual-Template10
ppp authentication-mode pap
ip address 202.38.160.1 255.255.255.0
#
interface Virtual-Template11
ppp authentication-mode pap
ip address 202.38.161.1 255.255.255.0
#
interface Atm1/0/0
pvc to_adsl_a 0/60
map bridge Virtual-Ethernet1/1/0
pvc to_adsl_b 0/61
map bridge Virtual-Ethernet1/1/1
#
interface Virtual-Ethernet1/1/0
pppoe-server bind Virtual-Template 10
#
interface Virtual-Ethernet1/1/1
pppoe-server bind Virtual-Template 11
#
aaa
authentication-scheme default
authentication-scheme radius
authentication-mode radius
return
Issue 5.3 (30 March 2009)
Nortel Networks Inc.
10-47