Installation Guide

BTR 28 GHz Release 1.2 1-13
BTR 28 GHz Installation Guide
Dual Mount Bracket
The dual mount bracket provides a single mounting facility for both the
primary and the redundant microwave transceivers, and the RPE 9000. In
turn, it is mounted on the single pole facility supplied by the network
operator.
The installer can adjust the elevation of either the individual transceiver or
both transceivers in unison. The installer can adjust the lateral angle of the
entire radio assembly. A stabilizing collar facilitates the operation of
adjusting the lateral angle of the radio as well as secures the unit to the pole.
The stabilizing collar consists of a saddle bracket and clamp that are bolted
onto the mounting pole. The dual mount bracket sits on the stabilizing collar.
Figure 1-2
Installed Dual Mount Bracket with Transceivers
Stabilizing Collar
BTR
Saddle Bracket
Dual Mount Bracket